Rear Stabilizer Removal/Installation [AWD]

REAR STABILIZER REMOVAL/INSTALLATION [AWD]

1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.





Bolt (Differential Front Side) Removal Note
1. Disconnect differential oil temperature sensor connector and 4WD solenoid connector.





2. Support the differential with a jack as shown in the figure.
3. Remove the bolt.

Bolt (Differential Front Side) Installation Note





1. Support the differential with a jack, and then install the bolt.
2. Connect differential oil temperature sensor connector and 4WD solenoid connector.