C2 Clutch Inspection

C2 CLUTCH INSPECTION





1. Inspect the lining of all drive plates.
^ If the lining is flaking or has changed color, or if it is worn or the print mark is wearing away, replace with a new drive plate. When replacing, inspect the contact surfaces between the retaining plate, driven plate and drive plate. If they are scratched or have changed color, replace with new parts.

Note: Before replacing with new drive plates, soak them at least 2 h in ATF.





2. Using vernier calipers, measure the free length of the piston return spring.

C2 clutch return spring free length:
Standard: 14.02 mm (0.5520 in)

^ If it is less than the specification, replace the piston return spring with a new one.