Drain Cover Removal/Installation
DRAIN COVER REMOVAL/INSTALLATION1. Remove the following parts:
1. Console
2. Quarter trim
3. Scuff plate
4. Tire house trim
5. Aeroboard
6. Front seat back bar garnish
7. Back trim
8. Seat belt set plate
9. Seat back crossmember assembly
10. Rear side trim
11. Rear package trim
12. Side shelf
13. Seat belt upper anchor installation bolt
14. Convertible top
15. Beltline protector
16. Retractor screen
2. Remove the fasteners.
3. Pull the drain cover upward and detach from the drain valve.
4. Remove the drain cover.
5. Detach the tabs of the drain valve from below the vehicle.
6. Remove the drain valve.
7. Install in the reverse order of removal