Knock Sensor: Service and Repair

KNOCK SENSOR (KS) REMOVAL/INSTALLATION [LF]

1. Remove the battery cover.
2. Remove the negative battery cable.
3. Remove the dynamic chamber. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [LF].)




4. Disconnect the KS connector.
5. Remove the KS installation bolt, then remove the KS.
6. Install in the reverse order of removal.

Tightening torque: 16-24 N.m {1.7-2.4 kgf.m, 12-17 ft.lbf}