Vehicle Lifting and Jacking
JACKING POSITIONSWARNING: Improperly jacking a vehicle is dangerous. The vehicle can slip off the jack and cause serious injury. Use only the correct front and rear jacking points and block the wheels.
- Use safety stands to support the vehicle after it has been lifted.
Front
NOTE: To prevent obstruction between the jack body and front bumper when the jack body is inserted, use a low-floor type jack (frame height is 170 mm or less).
- Near the center of the front crossmember.
Rear
- At the center of the rear differential.
VEHICLE LIFT (2 SUPPORTS) AND SAFETY STAND (RIGID RACK) POSITION
Vehicle Lift Positions
Front and rear
WARNING: Unstably lifting a vehicle is dangerous. The vehicle can slip off the lift and cause serious injury and/or vehicle damage. Make sure that the vehicle is on the lift horizontally by adjusting the height of support at the end of the arm of the lift.
- Both sides of the vehicle, on side sills
Safety Stand Positions
Front and rear
- Both sides of the vehicle, on side sills