Operation CHARM: Car repair manuals for everyone.

Steering: Service Precautions

GENERAL PRECAUTION (STEERING)

Wheels and Tire Installation





1. When installing the wheels and tires, tighten the wheel nuts in a crisscross pattern to the following tightening torque.

Tightening torque 88 - 118 Nm (9.00 - 12.0 kegs-m, 65.0 - 87.0 ft. lbs.)

Connector Disconnection
1. Disconnect the negative battery cable before performing any work that requires handling of connectors.

Power Steering Components Removal/Installation
1. If any power steering fluid line has been disconnected anytime during the procedure, add ATF M-111 or equivalent (e.g. Dexron II), bleed the fluid lines, and inspect for leakage after the procedure has been completed.