After Repair Procedure [SJ6A-EL]

AFTER REPAIR PROCEDURE [SJ6A-EL]

Caution:
^ After repairing a malfunction, perform this procedure to verify that the malfunction has been corrected.
^ When this procedure is carried out, be sure to drive the vehicle at lawful speed and pay attention to the other vehicles.





1. Connect the WAS or equivalent to the DLC-2.
2. Turn the ignition switch to the ON position (engine off).
3. Select the clear code function and clear the DTC.
4. Perform the following trouble code inspections to ensure that the DTC has been resolved:
5. Gradually slow down and stop the vehicle.
6. Make sure that no DTCs occur.