Disassembly Procedure

Disassembly Procedure





1. Blow compressed air into the oil passage as shown in the figure while pressing the B2 brake piston and brake cylinder by hand and remove the B2 brake piston.

Air pressure:
392 kPa (4.0 kgf-cm2, 57 psi)





2. Remove the O-ring from the B2 brake piston.





3. Remove the inner race from the F3 one-way clutch component.





4. Remove the O-ring from the B4 brake piston.





5. Remove the O-ring from the sleeve.





6. Remove the O-ring from the inner brake piston.