Clutch Pedal Assembly: Adjustments
CLUTCH PEDAL ADJUSTMENTClutch Pedal Stroke Inspection/Adjustment
1. Measure the clutch pedal stroke.
^ If there is any malfunction, loosen locknut A and adjust the pedal stroke with adjusting bolt B. Tighten locknut A after adjustment.
Standard pedal stroke 130 mm (5.12 in)
Clutch Pedal Play Inspection/Adjustment
1. Lightly depress the clutch pedal by hand until clutch resistance is felt and then measure the pedal play.
Standard
Clutch pedal play 5-15 mm (0.20-0.59 in)
Clutch pedal push rod play
At push rod setting line 0.1-0.5 mm (0.004-0.020 in) (Reference value)
At pedal pad: 0.5-2.9 mm (0.020-0.110 in)
2. If it is not within the specification, loosen locknut C and turn push rod D to adjust the pedal play.
3. Re-measure the pedal play and, if it is within the specification, tighten locknut C.