Clutch Pedal Assembly: Service and Repair
CLUTCH PEDAL REMOVAL/INSTALLATION1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
3. Inspect and adjust the clutch pedal.
Starter Interlock Switch Installation Note
Caution: If the rod is pushed in, it may not operate properly. Be careful not to push the rod in when installing the starter interlock switch.
1. Insert a new starter interlock switch into the pedal bracket hole in direction A.
2. While pushing the starter interlock switch in direction A, slide it in direction B until it locks securely
3. Move the clutch in a fully open stroke in direction C and securely fit the terminal of the starter interlock switch.