2. Transmission Case and 6TH Gear Component Disassembly
TRANSMISSION CASE AND 6TH GEAR COMPONENT DISASSEMBLYNote:
^ Measure the thrust and radial clearance of 6th gear before disassembly.
1. Disassemble in the order indicated in the table.
Snap Ring Disassembly Note
1. Remove the snap ring using two flathead screwdrivers and a hammer.
Clutch Hub Component (6th) Disassembly Note
1. Remove the clutch hub component (6th) and the 6th shift fork together using the SST.
Inner Shift Lever Disassembly Note
1. Attach a flathead screwdriver as shown in the figure, and remove the inner shift lever by tapping the shift rod with a plastic hammer.
Clutch Hub Sleeve Disassembly Note
1. Remove the clutch hub sleeve covering the clutch hub component with a rag to prevent the steel balls and synchronizer key springs from springing out.