Headlamp Washer Motor Relay: Testing and Inspection

HEADLIGHT CLEANER RELAY INSPECTION
1. Remove the headlight cleaner relay with the connector still connected.

2. Measure the voltage at each terminal (other than terminal F).
- If the voltage is not as specified in the Terminal Voltage Table (Reference), inspect the parts under "Inspection item(s)".

3. Disconnect the negative battery cable.

4. Verify that continuity at terminal F is as indicated in the Terminal Voltage Table (Reference).
- If there is any malfunction, Inspect the parts under "Inspection item(s)".
- If the system does not work properly even though the parts or related wiring harnesses do not have any malfunction, replace the headlight cleaner relay.