Dashboard Removal/Installation
DASHBOARD REMOVAL/INSTALLATION1. Remove the battery cover.
2. Disconnect the negative battery cable.
3. Remove the following parts:
1. Console
2. Glove compartment
3. Side wall
4. Console panel
5. Center panel unit
6. Lower panel
7. Knee bolster
8. Column cover
9. Driver-side air bag module
10. Steering wheel
11. Combination switch
12. Steering shaft
13. Meter hood
14. Instrument cluster
15. Side panel
16. Hood release lever
17. Female wedge
18. A-pillar trim
19. Scuff plate
20. Front side trim
21. Fusebox No.1
4. Disconnect the dashboard harness connectors.
5. Remove in the order indicated in the figure.
6. Install in the reverse order of removal.
