Hard Top: Service and Repair

DETACHABLE HARDTOP DISASSEMBLY/ASSEMBLY

1. Disassemble in the order indicated in the table.
2. To remove the striker, remove the following parts:
1. Female wedge
2. Map light
3. A-pillar trim
4. Front header trim

3. Assemble in the reverse order of disassembly.






Retainer Disassembly Note






1. Mark around the retainer installation screws with paint before removing them.

Retainer Assembly Note






1. Install the retainers to the link, aligning the retainer marks with the retainer installation screws.