Camber Adjustment

Camber Adjustment





1. Loosen the fixing nut of the adjusting cam bolt (rear lateral link (lower)).





2. Rotate the adjusting cam bolt in either direction to adjust the camber.

Vehicle equipped with 16-inch wheel:

Vehicle equipped with 17-inch wheel:

^ From the end of the rear fender to the center of the wheel (mm (in))








Note: Refer to the figure for the adjusting angle per one graduation.

3. Tighten the nut.
Tightening torque 117.7 - 137.3 Nm (12.1 - 14.0 kegs-cm, 86.9 - 101.2 ft. lbs.)