Total Toe-In Adjustment

Total Toe-in Adjustment





1. Loosen the installation nut of the adjusting cam bolt.





2. Rotate the adjusting cam bolt in either direction to adjust the toe-in.
Standard 3 ± 4 mm (0.08 ± 0.15 inch) (0°17' ± 20')





Note: Refer to the figure for the adjusting angle per one graduation of the toe-in gauge.

3. Tighten the nut.
Tightening torque 70 - 95 Nm (7.2 - 9.6 kegs-cm, 52 - 70 ft. lbs.)