Transmission Oil Inspection [P66M-D, 6 spd.]

TRANSMISSION OIL INSPECTION [P66M-D, 6 spd.]

1. Position the vehicle on level ground.





2. Remove oil filler plug.
3. Verify that the oil is near the brim of the plug port. If the oil is not near the brim of the plug port, add the specified amount and type of oil.

Transmission case specified oil grade: API Service GL-4

Transmission case specified oil viscosity: SAE 75W-90
4. Install oil filler plug and a new washer.

Tightening torque 40 - 59 Nm (4.1 - 6.0 kegs-cm, 30 - 43 ft. lbs.)