Transmission Oil Replacement [P66M-D, 6 spd.]

TRANSMISSION OIL REPLACEMENT [P66M-D, 6 spd.]

1. Position the vehicle on level ground.





2. Remove oil filler plug and drain plug, and then drain the oil.
3. Clean drain plug.
4. Install drain plug and a new washer.
Tightening torque 40 - 59 Nm (4.1 - 6.0 kegs-cm, 30 - 43 ft. lbs.)





5. Add the specified amount and type of oil through the plug port for oil filler plug to near the brim of the port.

Transmission case specified oil grade: API Service GL-4

Transmission case specified oil viscosity: SAE 75W-90

Transmission case capacity (approximately quantity): 2.1 L (2.2 US qt, 1.8 Imp qt)





6. Install oil filler plug and a new washer.

Tightening torque 40 - 59 Nm (4.1 - 6.0 kegs-cm, 30 - 43 ft. lbs.)