Brakes - Front Disc Rotor Retaining Screws Deleted

Bulletin No:
04-001/13

Last Issued:
01/30/2013

Subject:
DISCONTINUATION OF FRONT DISC PLATE FIXING SCREWS

APPLICABLE MODEL(S)/VINS

2007-2012 CX-7
2007-2013 CX-9
2006-2013 MX-5

DESCRIPTION





The front disc plate fixing screws (A) have been discontinued. With this change, the disc plate (B) and wheel hub (C) have been modified without fixing holes, eliminating the need for the fixing screws (A).

REPAIR PROCEDURE

Vehicles built without fixing holes do not require fixing screws.

When you install a modified disc plate or wheel hub (without fixing holes) on a vehicle built with fixing screws, the fixing screws are no longer required. You can discard the old screws.

NOTE:
There is no problem even if the screws are installed only on one side.





PART(S) INFORMATION





Disclaimer