Instruments - Configuring Odometer Data: Overview

Bulletin No.: 09-025/08

Last Issued: 8/29/2008

Subject:
ODOMETER DATA CONFIGURATION

BULLETIN NOTE:
This bulletin supersedes the previous bulletin 09-034/06, issued on 07/26/2006 and 09-009/07, issued on 03/14/2007. The APPLICABLE MODEL(S)/VINS and REPAIR PROCEDURE have been revised.

APPLICABLE MODEL(S)/VINS
2007-2009 CX-7
2007-2009 CX-9
2007-2009 Mazda3
2007-2009 MAZDASPEED3
2006-2009 Mazda5
2006-2009 MX-5
2009 Mazda6

DESCRIPTION

In the event the instrument cluster is replaced, this service tip provides information on copying odometer data from the old odometer to a new one using IDS/PDS updated to the latest software level. Data can be recorded to a new odometer unit, if the following conditions are met:

- Data in the old unit can be retrieved by IDS/PDS

- Odometer in the new instrument cluster is less than 63 mi (100 km)

- New instrument cluster has no damage (ie: "---" is not displayed)

- Instrument cluster voltage is over 9 volts.

NOTE:
^ A new or used instrument cluster with more that 63 mi (100 km) cannot be programmed with a different mileage.

^ There are two procedures in the bulletin, one for vehicles equipped without Advanced Keyless system and one for vehicles with Advanced Keyless system.





Disclaimer