Camshaft Assembly Note
Camshaft Assembly NoteNote
^ Install the camshaft with the No.1 cylinder cam aligned at TDC of the compression stroke.
1. Carefully apply adhesive agent to the area indicated in the figure so that it does not leak into the sliding part.
Thickness
1.0 mm (0.039 in)
2. Install the camshaft caps and hand-tighten the camshaft cap bolts evenly in two or three passes, and then tighten the camshaft cap bolts in two passes, in the order shown in the figure.
Tightening procedure
1) 5.0-9.0 N-m (51.0-91.7 kgf-cm, 44.3-79.5 in-lbf)
2) 14.0-17.0 N-m (1.5-1.7 kgf-m, 10.4-12.5 ft-lbf)