Programming and Relearning

PCM CONFIGURATION[L3 WITH TC]




1. Connect the M-MDS to the DLC-2.
2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
- When using the IDS (laptop PC)
1. Select the "Module Programming".

- When using the PDS (Pocket PC)
1. Select "Programming".
2. Select "Module Programming".

3. Then, select the "Programmable Module Installation", "PCM" from the screen menu.
4. Retrieve DTCs by the M-MDS, then verify that there is no DTC present.
- If a DTC is present, perform the applicable DTC inspection.