[AW6A-EL]

AFTER REPAIR PROCEDURE [AW6A-EL]

Caution:
^ After repairing a malfunction, perform this procedure to verify that the malfunction has been corrected.
^ When this procedure is carried out, be sure to drive the vehicle at lawful speed and pay attention to the other vehicles.





1. Connect the M-MDS to the vehicle DLC-2.
2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
^ When using the IDS (laptop PC)
1. Select "Toolbox" tab.
2. Select "Self Test".
3. Select "Modules".
4. Select "TCM".
^ When using the PDS (Pocket PC)
1. Select "Module Tests".
2. Select "TCM".
3. Select "Self Test".
3. Verify the DTC according to the directions on the screen.
4. Press the clear button on the DTC screen to clear the DTC.
5. Perform the following trouble code inspections to ensure that the DTC has been resolved:
^ For P0601, P0603, P0604, P0780, P0817, P0882, P0883, P0942, P0961, P0962, P0963, P0973, P0974, P0976, P0977, P0978, P0979, P0980, P0981, P0982, P0983, P0984, P0985, P0986, P0997, P0998, P0999, P1700, P2762, P2763, P2764
i. Start the engine.
ii. Warm up the engine and ATX
iii. Drive the vehicle in D range and make sure that the gears shift smoothly from 1GR to 6GR.
iv. Go to Step 6.
^ For P0706, P0707, P0708
i. Start the engine.
ii. Warm up the engine to normal operating temperature.
iii. Depress the brake pedal, and shift the selector lever from P to D for 5 s or more.
iv. Go to Step 6.
^ For P0711
i. Start the engine.
ii. Warm up the engine to normal operating temperature.
iii. Drive the vehicle in D range for 15 min or more.
iv. Go to Step 6
^ For P0712, P0713
i. Start the engine.
ii. Warm up the engine to normal operating temperature.
iii. Drive the vehicle in D range for 150 s or more.
iv. Go to Step 6.
^ For P0717, P0722
i. Start the engine.
ii. Warm up the engine to normal operating temperature.
iii. Drive the vehicle, two separate times, in D range at 20 km/h (12 mph) or more for 150 s or more.
iv. Go to Step 6.
^ For P0731, P0732
i. Start the engine.
ii. Warm up the engine to normal operating temperature.
iii. Drive the vehicle in D range, at 10 km/h (6 mph) or more for 2 s or more.
iv. Go to Step 6.
^ For P0733
i. Start the engine.
ii. Warm up the engine to normal operating temperature.
iii. Drive the vehicle in D range, at 20 km/h (12 mph) or more for 2 s or more.
iv. Go to Step 6.
^ For P0729, P0734, P0735
i. Start the engine.
ii. Warm up the engine to normal operating temperature.
iii. Drive the vehicle in D range, at 40 km/h (25 mph) or more for 2 s or more.
iv. Go to Step 6.
^ For P0736
i. Start the engine.
ii. Warm up the engine to normal operating temperature.
iii. Drive the vehicle in R range.
iv. Go to Step 6.
^ For P0819
i. Start the engine.
ii. Warm up the engine to normal operating temperature.
iii. Drive the vehicle in M range, and shift the selector lever (operate up and down switches) between 1GR to 6GR for 10 s or more.
iv. Go to Step 6.
^ For P2757
i. Start the engine.
ii. Warm up the engine and ATX.
iii. Drive the vehicle in D range and make sure that the gears shift smoothly from 1GR to 6GR and TCC is operated.
iv. Go to Step 6.
^ For P2758
i. Start the engine.
ii. Warm up the engine to normal operating temperature.
iii. Drive the vehicle in D range and make sure that the gears shift smoothly from 1GR to 6GR and TCC is no operated.
iv. Go to Step 6.
6. Gradually slow down and stop the vehicle.
7. Make sure that no DTCs occur.