Fuel Door Release Cable: Service and Repair
FUEL-FILLER LID OPENER REMOVAL/INSTALLATION1. To remove the fuel-filler lid opener, remove the trunk side trim (LH).
2. When removing the fuel-filler lid opener lever, perform the following procedure:
1. Remove the inner scuff plate (driver's side).
2. Remove the front side trim (driver's side).
3. Remove the fasteners and the wiring harness clips, and then partially peel back the floor covering so that the fuel-filler lid opener lever can be removed.
3. When removing the fuel-filler lid opener cable, perform the following procedure:
1. Partially peel back the trunk mat.
2. Remove the rear seat (driver's side).
3. Remove the tire house trim (driver's side).
4. Partially peel back the floor covering so that the fuel-filler lid opener cable can be removed.
4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.
6. Adjust the fuel-filler lid.