Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2007 >> RX8 2RTR-1.3L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Overhaul >> Mechanical >> Housing Assembly II >> Front Cover Assembly Note

Front Cover Assembly Note

Front Cover Assembly Note





1. Before installing the front cover, install the pulley boss to the eccentric shaft and measure the height between the eccentric shaft top and the pulley boss.
^ If not within the specification, verify that the spacer is not caught in the needle bearing.

Standard
10.34-11.14 mm (0.4071-0.4385 in)





2. Tighten the engine front cover installation bolts in the order shown in the figure.

Tightening torque
18.6-25.5 N-m (1.90-2.60 kgf-m, 13.8-18.8 ft-lbf)

pro multis · About Operation CHARM