Pinout Values and Diagnostic Parameters

DATA MONITORING AND RECORDING PROCEDURE




1. Connect the M-MDS to the diagnostic connector 2 (16-pin).
2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.

When using the IDS (laptop PC)
- Select the "Toolbox" tab.
- Select "DataLogger".
- Select "Modules".
- Select "IC".

When using the PDS (Pocket PC)
- Select "Module Tests".
- Select "IC".
- Select "DataLogger".

Indication Item Table:

3. Verify the data monitor items.