Programming and Relearning

PCM CONFIGURATION




1. Connect the M-MDS to the DLC-2.
2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
- When using the IDS (laptop PC)
1. Select the Module Programming.

- When using the PDS (Pocket PC)
1. Select Programming.
2. Select Module Programming.

3. Then, select the Programmable Module Installation and PCM from the screen menu.
4. Retrieve DTCs using the M-MDS, then verify if DTCs are present.
- If a DTC is present, perform the applicable DTC inspection.