Operation CHARM: Car repair manuals for everyone.

On-Board System Readiness Tests Access Procedure

On-Board System Readiness Tests Access Procedure




1. Connect the M-MDS to the DLC-2.
2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
- When using the IDS (laptop PC)
1. Select the "Toolbox" tab.
2. Select "Powertrain".
3. Select "OBD Test Modes".
4. Select "Mode 1 Powertrain Data".

- When using the PDS (Pocket PC)
1. Select "OBD II Modes".
2. Select "Mode 1 Powertrain Data".

3. Then, select the "***SUP and ***EVAC" PIDs in the PID selection screen.
4. Monitor those PIDs and check it system monitor is completed.