LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> RX8 2RTR-1.3L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> SJ6A-EL Automatic Transmission Service >> B2, B4 Brake and F3 One-Way Clutch Component Assembly >> Assembly Procedure

Assembly Procedure

Assembly Procedure





1. Apply ATF to the new O-rings.
2. Install the O-rings to the B4 brake piston.
3. Apply ATF to the new O-rings.





4. Install the O-rings to the sleeve.
5. Apply ATF to the new O-ring.





6. Install the O-rings to the B4 brake piston.
7. Apply ATF to the inner race and the F3 one-way clutch component.





8. Install the inner race to the F3 one-way clutch component.
9. Apply ATF to the new O-ring.





10. Install the O-ring to the B2 brake piston.
11. Apply ATF to the brake cylinder and the B2 brake piston.

Caution: Do not damage the O-ring.





12. Install the B2 brake piston to the brake cylinder.
scientia non olet · About LEMON Manuals