Stall Speed Test
Stall Speed Test1. Perform mechanical system test preparation. (See Mechanical System Test Preparation.)
2. Start the engine.
3. Firmly depress the brake pedal with the left foot.
4. Shift the selector lever to the D range.
Caution:
^ If the accelerator pedal is pressed for more than 5 s while the brake pedal is pressed, the transmission could be damaged. Therefore, perform Steps 5 and 15 within 5 s.
5. Gently depress the accelerator pedal with the right foot.
6. When the engine speed no longer increases, quickly read the engine speed and release the accelerator pedal.
7. Shift the selector lever to the N position and idle the engine for 1 min or more to cool the ATF
8. Perform a stall test of the M range and R position in the same manner as in Steps 3-7.
9. Turn off the engine.
Engine Stall Speed:
Evaluation Of Stall Test:
