Trunk Side Trim Removal/Installation
TRUNK SIDE TRIM REMOVAL/INSTALLATION4 Door
1. Remove the following parts:
1. Rear seat
2. Rear scuff plate
3. Tire house trim
4. Trunk end trim
5. Service hole cover (LH)
2. Remove the fasteners, then remove the trunk side trim.
3. Install in the reverse order of removal.
5 Door
1. Remove the following parts:
1. Rear seat
2. Rear scuff plate
3. Tire house trim
4. Trunk end trim
5. Trunk side upper trim
6. Cargo compartment light
2. Remove the screws, then remove the trunk board.
3. Remove the screws, then remove the cargo net hooks.
4. Remove the fasteners.
5. Detach the clip A and remove the trunk side trim.
6. Install in the reverse order of removal.