Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2008 >> 3 L4-2.0L >> Repair and Diagnosis >> Brakes and Traction Control >> Hydraulic System >> Hydraulic Control Assembly - Antilock Brakes >> Testing and Inspection >> Scan Tool Testing and Procedures

Scan Tool Testing and Procedures

DSC HU/CM INSPECTION
1. Disconnect the DSC HU/CM connector.
2. Connect the negative battery cable.
3. Attach the tester lead to the DSC HU/CM wiring harness-side connector and inspect voltage, continuity, or resistance according to the standard (reference) on the table.

Standard (Reference)

Standard Reference (Part 1):




Standard Reference (Part 2):




pro multis · About Operation CHARM