Oil Control Valve (OCV) Removal/Installation

OIL CONTROL VALVE (OCV) REMOVAL/INSTALLATION [LF, L3]
1. Disconnect the negative battery cable.
2. Remove the following parts.
- Plug hole plate
- Ignition coils
- Oil control valve (OCV) connector
- Ventilation hose
- Cylinder head cover
- Oil control valve (OCV)





3. Install in the reverse order of removal.

Tightening torque
8.0 - 11.5 Nm (81.6 - 117.2 kgf-cm, 70.9 - 101.7 in-lbf)