Stall Test

Stall Test
1. Perform mechanical system test preparation. (See Mechanical System Test Preparation.) Mechanical System Test
2. Start the engine and shift the selector lever to R position.

Caution:
^ Do not maintain WOT in any position/range for more than 5 seconds, or transaxle damage will occur.

3. Firmly depress the brake pedal with the left foot, and depress the accelerator pedal to floor (WOT) with the. right.
4. When the engine speed no longer increases, quickly read the engine speed and release the accelerator pedal.
5. Shift the selector lever to N position and let the engine idle for 1 minute or more to cool the ATF
6. Perform stall tests of D, M (1GR, 2GR) ranges in the same manner.
7. Turn off the engine.

Engine stall speed

Engine Stall Speed:

Evaluation of stall test

Evaluation Of Stall Test: