Antitheft and Alarm Systems: Service and Repair

COIL ANTENNA REMOVAL/INSTALLATION

NOTE: Do not remove the coil antenna unless you are replacing it.

1. Remove the battery cover.
2. Disconnect the negative battery cable.
3. Remove the following parts:
1. Hood release lever.
2. Front scuff plate inner (Driver's side).
3. Front side trim (Driver's side).
4. Lower panel.
5. Column cover.
6. Outer cylinder.




4. Disconnect the coil antenna connector.
5. Detach the steering lock tabs from the holes on the coil antenna.
6. Install in the reverse order of removal.