Navigation System: Application and ID

SUPPLIER IDENTIFICATION PROCEDURE [CAR-NAVIGATION SYSTEM]

NOTE: The supplier can vary with the module. When asking the supplier (service center) for repair or replacement, identify the supplier and fill in the Audio Repair Order Form with the following procedures.


Identification Using the Label or Inscribed Lettering
1. Disconnect the negative battery cable.
2. Remove the following parts:
1. Side wall.
2. Selector lever knob (ATX).
3. Shift lever knob (MTX).
4. Front console.
5. Climate control unit.
6. Car-navigation unit.

3. Verify the supplier by referring to the label attached to each unit.

Verify Using the Diagnostic Assist Function
1. Launch the diagnostic assist function. (See DIAGNOSTIC ASSIST FUNCTION [CAR-NAVIGATION SYSTEM].) Component Tests and General Diagnostics




2. Press the "Diagnostic assist code input switch", and input the diagnostic assist code "06".
3. Select "ENTER".
4. Identify the supplier code by referring to the display.






5. Press the POWER/VOLUME switch to return to the diagnostic assist code input screen.
6. Press the POWER/VOLUME switch to release the diagnostic assist function.