Carpet: Service and Repair
FLOOR COVERING REMOVAL/INSTALLATION1. Remove the battery cover.
2. Disconnect the negative battery cable.
3. Remove the following parts:
1. Front seat
2. Second-row seat
3. Rear package tray lid
4. Sub-trunk
5. Third-row seat
6. Center console
7. Center console bracket
8. Front scuff plate inner
9. Front side trim
10. Side wall
11. Front console
12. Dust cover
13. Rear scuff plate
14. B-pillar lower trim
15. Trunk end trim
16. Third-row seat belt lower anchor installation bolt
17. Cargo compartment light
18. Trunk side trim
4. Remove fastener A, B, and C.
5. Take the floor covering out from the opened liftgate.
6. Install in the reverse order of removal.