C-Pillar Trim Removal/Installation
C-PILLAR TRIM REMOVAL/INSTALLATION1. Remove the following parts:
1. Rear package tray lid
2. Sub-trunk
3. Third-row seat
4. Rear scuff plate
5. Trunk end trim
6. Third-row seat belt lower anchor installation bolt
7. Cargo compartment light
8. Trunk side trim
9. Rear header trim
10. Second-row seat belt upper anchor installation bolt
2. Partially peel back the seaming welt.
3. Remove the fastener.
4. Remove clips A, and pins B using a fastener remover.
5. Remove the belt bezel, and remove the third-row seat belt from the C-pillar trim.
6. Slide the C-pillar trim to the vehicle front and remove clips C from the C-pillar trim.
7. Remove the C-pillar trim.
8. Remove clips C from the body, then install it to the C-pillar trim.
9. Install in the reverse order of removal.