Front Door Latch and Lock Actuator

FRONT DOOR LATCH AND LOCK ACTUATOR REMOVAL/INSTALLATION

1. Remove the battery cover.
2. Disconnect the negative battery cable.
3. Remove the following parts:
1. Inner garnish.
2. Front door trim.
3. Front door glass.
4. Front door speaker.
5. Front inner handle.
6. Front door module.

4. Remove in the order indicated in the table.






5. Install in the reverse order of removal.

Connector Removal Note
1. Pull the stopper of the front door lock actuator connector in the direction of the arrow (1).




2. Disconnect the front door lock actuator connector while pushing at point A.