Removal and Replacement
SUNROOF UNIT REMOVAL/INSTALLATION1. Remove the battery cover.
2. Disconnect the negative battery cable.
3. Remove the following parts:
1. A-pillar trim
2. Front scuff plate inner
3. Rear scuff plate
4. B-pillar lower trim
5. Front seat belt upper anchor installation bolt
6. B-pillar upper trim
7. Rear package tray lid
8. Sub-trunk
9. Third-row seat
10. Trunk end trim
11. Rear header trim
12. Third-row seat belt lower anchor installation bolt
13. Cargo compartment light
14. Trunk side trim
15. Second-row seat belt upper anchor installation bolt
16. C-pillar trim
17. Map light
18. Sunvisor
19. Assist handle
20. Seaming welt
21. Headliner
22. Shock absorbing pad
23. Glass panel
4. Disconnect the front and rear drain hoses from the sunroof frame.
5. Disconnect the sunroof motor connector.
6. Disconnect the intruder sensor connector. (Vehicles with the theft-deterrent system)
7. Remove the bolts and nuts, then remove the sunroof unit.
8. Install in the reverse order of removal.
9. Adjust the glass panel.