Rear Fan Switch Inspection [Full-Auto Air Conditioner]

REAR FAN SWITCH INSPECTION [FULL-AUTO AIR CONDITIONER]

1. Remove the rear fan switch.
2. Verify that the continuity between the rear fan switch terminals is as indicated in the table.
- If not as indicated in the table, replace the rear fan switch.






3. Apply battery voltage to the rear fan switch terminal B, and connect terminal H to ground.
4. Apply battery voltage to the rear fan switch terminal B, and connect terminal 1 to ground.
5. Apply battery voltage to the rear fan switch terminal A, and connect terminal K to ground.
6. Verify that the LED illuminates.
- If there is any malfunction, replace the rear fan switch.