Auxiliary Power Outlet: Service and Repair

ACCESSORY SOCKET REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the following parts:
1. Rear package tray lid.
2. Third-row seat.
3. Rear scuff plate.
4. Trunk end trim.
5. Lower anchor of the third-row seat belt.
6. Cargo compartment light.
7. Trunk side trim.

3. Remove in the order indicated in the table.






4. Install in the reverse order of removal.

Accessory Socket Removal Note




1. While pressing a tape-wrapped flathead screwdriver against the cap projection, pull the accessory socket outward.

Cap Removal Note




1. While pressing the tabs, pull the cap outwards.