Spark Plug: Service and Repair

SPARK PLUG REMOVAL/INSTALLATION [L3]

CAUTION: If a spark plug that is not as specified is installed, engine performance will be deteriorated. Install only the specified spark plug when replacing.


1. Remove the battery cover.
2. Disconnect the negative battery cable.
3. Remove the plug hole plate.
4. Remove the ignition coils.
5. Remove the spark plugs using a plug-wrench.
6. Install in the reverse order of removal.

Tightening torque:
10-14 N.m {1.1-1.4 kgf.m, 8-10 ft.lbf}