Reading and Clearing Diagnostic Trouble Codes
DTC Reading Procedure1. Perform the necessary vehicle preparation and visual inspection.
2. Connect the M-MDS to the DLC-2.
3. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
^ When using the IDS (laptop PC)
1. Select "Self Test".
2. Select "Modules".
3. Select "TCM".
^ When using the PDS (Pocket PC)
1. Select "Module Tests".
2. Select "TCM".
3. Select "Self Test".
4. Verify the DTC according to the directions on the M-MDS screen.
^ If any DTCs are displayed, perform troubleshooting according to the corresponding DTC inspection.
5. After completion of repairs, clear all DTCs stored in the TCM. (See AFTER REPAIR PROCEDURE [FS5A-EL].) After Repair Procedure