Cowl: Service and Repair

COWL SIDE REINFORCEMENT AND COWL UPPER PLATE REMOVAL

1. Remove the cowl side reinforcement.

NOTE: The weld locations (B) in the figure indicate the same locations.

CAUTION: Be careful not to damage the windshield when drilling the location indicated by (A).




2. Remove the cowl upper plate.

COWL SIDE REINFORCEMENT COWL UPPER PLATE INSTALLATION

1. When installing new parts position each part so that the section measurement aligns to the body dimension.
2. Drill holes to: plug welds before installing new parts.




3. After final-fitting new parts, make sure the related parts fit properly.