Brake Lines Disconnection/Connection

Brake Lines Disconnection/Connection

Caution
^ Brake fluid will damage painted surfaces. If brake fluid does get on a painted surface, wipe it off immediately.

1. Tighten the brake pipe flare nut using the commercially available flare nut wrench. Be sure to modify the brake pipe flare nut tightening torque to allow for use of a commercially available flare nut wrench.
(See SERVICE CAUTIONS.)
2. If any brake line has been disconnected anytime during the procedure, add brake fluid, bleed the brakes, and inspect for leakage after the procedure has been completed.