LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2008 >> 6 L4-2.3L >> Repair and Diagnosis >> Transmission and Drivetrain >> Manual Transmission/Transaxle >> Service and Repair >> Overhaul >> Manual Transaxle A65M-R >> Overhaul Procedures A65M-R >> Secondary Shaft Components Disassembly >> 3RD Gear, 2ND Gear, 2ND Needle Bearing, 2ND Bushing, 2ND Inner Synchronizer Component, 1ST/2ND Clutch Hub Set, 1ST Inner Synchr

3RD Gear, 2ND Gear, 2ND Needle Bearing, 2ND Bushing, 2ND Inner Synchronizer Component, 1ST/2ND Clutch Hub Set, 1ST Inner Synchr

3rd Gear, 2nd Gear, 2nd Needle Bearing, 2nd Bushing, 2nd Inner Synchronizer Component, 1st/2nd Clutch Hub Set, 1st Inner Synchronizer Component, 1st Needle Bearing, 1st Bushing, 1st Gear and Reverse Main Gear Disassembly Note





1. Remove the 3rd gear, 2nd gear, 2nd needle bearing, 2nd bushing, 2nd inner synchronizer component, 1st/2nd clutch hub set, 1st inner synchronizer component, 1st needle bearing, 1st bushing, 1st gear and reverse main gear at the same time using the SST.
scientia non olet · About LEMON Manuals