Camshaft Cap (RH) Disassembly Note

Camshaft Cap (RH) Disassembly Note
1. Before removing the camshaft cap, inspect the following.
1) Camshaft end play.
2) Camshaft journal oil clearance.

Caution
^ Remove the camshaft bearing thrust caps 1R and 5R first. Do not loosen any of the other bolts until the thrust caps are removed, or damage to the thrust caps may occur.

Note
^ The camshaft bearing caps are numbered to make sure they are assembled in their original positions. When removed, keep the bearing caps with the cylinder head from where they were removed. Do not mix the caps.





2. Remove the camshaft cap bolts in the order indicated in the figure, loosening in several passes.