Keyless Entry Receiver: Service and Repair

KEYLESS RECEIVER REMOVAL/INSTALLATION [ADVANCED KEYLESS SYSTEM]

Front
1. Disconnect the negative battery cable.
2. Remove the glove compartment lid.
3. Disconnect the keyless receiver module connector.




4. Remove the nut, then remove the keyless receiver (front).
5. Install in the reverse order of removal.

Rear
1. Disconnect the negative battery cable.
2. Remove the trunk side trim.
3. Remove the nuts.
4. Disconnect the connector.




5. Remove the keyless receiver (rear).
6. Install in the reverse order of removal.