Floor Covering Removal/Installation

FLOOR COVERING REMOVAL/INSTALLATION

1. Remove the battery cover.
2. Disconnect the negative battery cable.
3. Remove the following parts:
1. Seat
2. Console
3. Side wall
4. Console panel
5. Foot rest
6. Quarter trim
7. Scuff plate
8. Front side trim
9. Tire house trim
10. Aeroboard
11. Front seat back bar garnish
12. Back trim






4. Cut away the floor covering as shown in the figure.

NOTE: The cut part needs to match up when installing the floor covering.






5. Remove the fasteners.
6. Remove the floor covering.
7. Install in the reverse order of removal.

Rear Floor covering (Power Retractable Hardtop)
1. Fully open the deck panel.
2. Remove the side shelf.






3. Remove the stoppers.
4. Remove the fasteners.
5. Remove the rear floor covering.
6. Install in the reverse order of removal.